2015-01-20 - New UI features (Prophet)
- The old measurement UI is now officially deprecated, the revamped new UI/API is now the default
- Many pages have been re-stylised in preparation for a new visual layout
2015-01-28 - New UI features (Q)
- Some fine tuning on the new measurement UI
- Many internal improvements
- Added a new banner to notify users about the upcoming new Terms & Conditions
- Many pages have been re-stylised in preparation for a new visual layout
- Allow searching in the probe API by using a geographical "bounding box"
2015-02-04 - New UI features and enhancements (Romulan)
- More UI conversion for the upcoming layout changes
- Added a feature to search for probes by "centre" and "distance" as filter
- UDM UI documentation has been updated to match the new UI
- Add the number of probes involved in a measurement to the measurement listing page
- Enhanced the probe auto-geolocation feature and relevant UI bits
2015-02-11 - New UI features and enhancements (Son'a)
- Many internal changes
- It is now possible to select probes in the measurement specifications UI without using the interactive map ("new set - manual" in the probe selection section)
- For ordinary users show IP and controller in list of connects
- Be more verbose in warning on automatic geolocation or no geolocation at all, and asking the user for a real location
2015-03-04 - New UI features and enhancements (Vulcan)
- Many internal changes
- Allow NTP measurements for all users (using the API)
- Various improvements to the data streaming service
- Resurrect "IPv6 traceroute for LIRs" feature
- Fix rendering error on root DNS TCP/UDP comparison map
- Show various system flags on the user setting page
2015-04-14 - UI changes (Yridian)
- Major layout changes: switched to the new RIPE NCC UI design/layout
- Fixed an issue on the probe deployment map where disconnected probes may have shown up as connected
- Ambassadors can now mark their attendance at various conferences
- Display the ASN name(s) in the probe status page
- Fixed an issue where "today" was not available as a potential end time when downloading results
- The "written off" status is now displayed in the probe status page, giving an indication to the viewer about potential issues
- Fix dropdown and datepickers in API key generation page
- Remove the 'port' field for non-TCP traceroutes
- Disable the Target field for use-probe-resolver
2015-04-20 - UI changes (Zahl)
- Major internal changes to accounting (credits) with minor UI related changes
- Fixed a bug in probe selection by list of probe IDs
- More alignment to the new house style
- API call to get metadata of a measurement now appears in the measurement info page
2015-04-29 - UI changes (Aerith Gainsborough)
- Change the page layout of the probe's built-in measurement tab to be responsive (i.e. behave better when the browser window is narrow)
- NTP measurements have been added to the measurement UI
- Many internal changes
2015-05-22 - New UI release (Bowser)
- Deployed a whole new version for displaying all maps; now it includes hiding/showing of some results, better filtering and more
- Fix for some cases where a statically specified DNS server would not be shown as such in the probe network config page
- The "LIR IPv6 traces" function has been renewed; it includes IPv4 traces too
- Added a page to documentation about built-in measurements
- Improve documentation on result streaming
2015-05-27 - New UI release (Cloud Strife)
- Added a table to the probe status page to show the results of the various probe IP discovery methods
- Lots of small fixes and improvements to the maps
- Added a human friendly view of traceroute results
2015-06-10 - New UI release (Donkey Kong)
- Minor tweaks to the cost estimator in the measurement creation page
- Fixed a couple of bugs in the new maps
- Many internal optimisations to make the UI faster
- Applied minor changes to the global page template
- Documented the existence of system-ula and system-rfc1918 probe tags
2015-06-17 - New UI release (Ezio)
- Various internal changes
- Added region name suggestions when adding new measurements using manual probe selection
- Fixed an issue when "LIR IPv6 connectivity test" failed in certain cases
2015-06-24 - New UI release (Fox McCloud)
- Various internal changes
- Added some new k-root anycast instance names
- Added support for CD bit in DNS measurements
2015-06-29 - New UI release (GLaDOS)
- Major internal changes to the measurement API (not visible to users)
- Fixed a bug where the ASN/country filter did not work on the network coverage map
- Make the "built-in measurements" tab of the public probes' status page visible for all users
- Minor tweaks to the anchor list and the anchor-as-a-probe page
- Change the colour scheme used for the maps to a more distinctive set
2015-07-08 - New UI release (Herman Toothrot)
- Many internal changes for stability and scalability
- Maps for DNS measurements have been extended to visualise RTT, answer and NSID diversity
- Fixed some minor issues in the "probe down" notification settings
- Fixed an issue which in some cases prevented DELETE/stop measurement from working (since GLaDOS)
- NTP measurements now also have a useful map visualisation
2015-07-22 - New UI release (Jim Raynor)
- Lots of internal changes as usual
- Small enhancements to the section showing the probe's public IP address
- Fixed a bug with possible redirection loops after login
- Added a pagination limit to the measurement and probe APIs
- Minor fixes with result maps not always showing correctly
2015-07-29 - New UI release (Kirby)
- Fixed a corner case where measurements with no data plotted maps with all the probes and no colour.
- Started enforcing a pagination limit in UI and API for probes and measurements
- Do not show the seismograph for one-off pings
- Show the network details of public probes in UI
- Enabling gzip compression for the measurement API data downloads
- Many internal changes mostly to prepare the way for new visualisations
2015-08-05 - New UI release (Lara Croft)
- Major enhancements to visualisations of UDM measurements (see the maps for these measurements)
- Show IPv4/IPv6 properties for UDMs consistently all across the site
- Added "time travel" feature to UDM maps / probe listings
- Lots of preparations for upcoming visualisations
2015-08-12 - New UI release (Mario)
- Added an option to the measurement API to filter the list to "my measurements"
- Added a "time travel" feature to virtually all maps of ongoing measurements to check the status of the map at a certain point in the past
- DNS maps for UDMs now have multiple variations of result visualisations (RTT, SOA or answer)
- Enabled HTTP measurements towards RIPE Atlas anchors
2015-08-19 - New UI release (Navi)
- Added support for packet-interval for ping measurements
- Probe API now allows filtering available probes by address family (af)
- Upgrade ripe.atlas.sagan to 1.0.0
- Show total number of probes on available maps
- Fix for case where probes appeared twice in a probe API filter
- Fix for grey markers appearing when filters are enabled on some maps
- Fixed a visualisation bug in the credits history view where not all charts showed up
2015-08-26 - New UI release (Odahviing)
- Probe uptime log entries are posted real-time now, there's no more delay in the UI
- It is now possible to assign other individuals as co-hosts for a probe
- Probes that are co-hosted by me ("shared with me") now show up on a separate tab in the probe list
- Numerous internal changes for stability and scaleability
- Fixed an issue map filtering only worked once per page load
2015-09-23 - New UI release (Samus, Ratchet, Princess Peach, Q*Bert)
- Various fixes to LatencyMON
- Document LatencyMON and expose it to more users
- Update Sagan to 1.1.0
- While doing time travel, show 100% packet loss with a distinct colour
- Traceroute output has been revamped in various places throughout the UI
- Various changes to ambassador pages
- Quicklook has been switched to use data streaming for fetching results
- Fixed a bug in the NTP maps where the time offset could be displayed wrong
- More additions to the v2 APIs
- Fixed a bug in the measurement archiver where the end time of measurements was recorded incorrectly
2015-09-30 - New UI release (Tifa Lockhart)
- Preparations for "credit vouchers"
- Changes to probe application procedures related to size of ASN of the host's network
- Include RTTs and packet loss values in various map popups
- Various minor bugfixes in time travel maps
- Fixed a bug where prefix searches did not supply "more specific" results in probe and measurement APIs
- Added a measurement interval "spread control" feature to the measurement forms
- Lots of internal changes to keep up with version changes of the underlying web framework
2015-10-07 - New UI release (Umaro)
- Minor fixes on DNS root instance maps
- Fix a bug where probe tags were not suggested properly in the new measurement form
- Expose built-in measurements in a separate tab in the measurement listing
- Added more info to the measurement UI about the specification of the measurement
- Credit archive download now supports fragmented JSON format
- Fix an edge case where the traceroutes did time travel before history began
- Various fixes to LatencyMON and its documentation
2015-10-27 - New UI release (Vaan, Wario, Xzar)
- The UDM "region map" is now part of the documentation again
- The measurement scheduler now recognises the existence of blacklists ("do not probe") and whitelists ("no restrictions on measuring"). You can let us know via email (to atlas@ripe.net) if you'd like to whitelist/blacklist your prefixes.
- Various changes to the upcoming v2 APIs
- Enable DNSMON tab for all DNS UDMs
- Added an anchor quick-search feature to the "select probe IDs manually" form
2015-11-30 - New UI release (Yuna, Zelda)
- Major internal changes due to web framework upgrade
- Older roadmap entries are now available in the roadmap archive
- Various usability fixes in measurement details, maps, LatencyMON and DomainMON
2015-12-09 - New UI release (Archangel)
- Various usability fixes
- Added an IPv4/IPv6 comparison page to all anchors, using LatencyMON. See this example
- Various fixes in the simple traceroute UI layout (add DNS names, fix layout with late packets)
- Added HTTP to the list of anchoring measurements
- Add DomainMON to the menu
2015-12-16 - New UI release (Batman)
- Fix a case where the number of reported number of currently responding probes could fluctuate as a function of time
- Put watermarks on LatencyMON widgets
- Minor fixes to DomainMON